name: sheet: date: rhombus p/n: cust p/n: rhombus transformers & magnetic products industries inc. 15801 chemical lane, huntington beach, ca 92649 phone: (714) 898-0960 fax: (714) 896-0971 www.rhombus-ind.com part l (1) idc (2) idc (3) i (4) dcr lead number ( m h) 20% 50% max. max size typ. amps amps amps (m w) awg L-14725 108.4 6.50 14.62 9.70 45 17 1 of 1 2/14/00 L-14725 electrical specifications at 25 o c 1) typical inductance with no dc. tolerance of + 10% 2) current which will produce a 20% reduction in l. 3) current which will produce a 50% reduction in l. 4) maximum dc current. this value is for a 40 o c temperature rise due to copper loss. with ac flux density kept to 10 gauss or less. (this typically represents a current ripple of less than 1%). power induct ors sendust material (al & si fe) well suited for switch mode power supplies and regulator applications. varnish finish optional by adding a "v" suffix to the part number . core core core loss loss loss @50khz @100khz @300khz 5657 16000 83138 core loss in mw/cm 3 @4000gauss core loss data is provided for comparison with other listed inductor materials and is for reference only. physical dimensions inches (mm) schematic diagram lead diameter : 0.0483 .510 ( 12.95 ) t y p.. 1.520 ( 36.60 ) t y p. *0.375 ( 9.53 ) .520 ( 13.20 ) t y p. *+0.125/-0.025
|